3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate
3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5,5-tetramethyltrisiloxan-3-yl)propyl 2-methylprop-2-enoate
CAS: 17096-10-5
Molecular Formula: C19H38O5Si4
3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate - Names and Identifiers
3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate - Physico-chemical Properties
| Molecular Formula | C19H38O5Si4 |
| Molar Mass | 458.84 |
| Density | 0,952 g/cm3 |
| Boling Point | 402.453°C at 760 mmHg |
| Flash Point | >200°C |
| Vapor Presure | 0mmHg at 25°C |
| Specific Gravity | 0.952 |
| Storage Condition | below 5° C |
| Sensitive | 3: reacts with aqueous base |
| Refractive Index | 1.448 |
3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate - Risk and Safety
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| TSCA | No |
3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate - Introduction
3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5,) phenylpropyl 2-methylprop-2-enoate is an organosilicon compound with the chemical formula C10H24O2Si, commonly abbreviated as PEG-silane. The following describes its nature, use, preparation and safety information:
Nature:
-Appearance: colorless liquid
-Solubility: Soluble in organic solvents such as ethanol and dimethyl benzene
-Melting point: About -90 ° C
-Boiling point: About 240 ° C
Use:
3-(1,5-diethenyl-3-{[ethenyl (dimethyll) silyl]oxy}-1,1,5, phenyl) propyl 2-methylprop-2-enoate is widely used in the surface modification and coatings industries, including:
-As an additive for inks and coatings, it can improve its adhesion and water resistance
-Used to treat cellulose-based materials to improve their wettability and water resistance
-As a crosslinking agent for adhesives to improve bonding strength and durability
-In the rubber industry, it can be used to improve the bonding performance of rubber and metal or other materials
-Used to prepare polymer materials, such as polyamide, epoxy resin, etc.
Method:
The preparation method of 3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5, phenyl) propyl 2-methylprop-2-enoate is complicated, generally synthesized by chemical reaction.
Safety Information:
- 3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5,) propyl 2-methylprop-2-enoate does not have a corrosive effect on most materials at room temperature.
-During use or storage, care should be taken to avoid contact with strong oxidants and strong acids to prevent the production of hazardous substances or the release of harmful gases.
-Use with appropriate protective gloves, goggles and protective clothing. In case of careless contact, rinse with plenty of water immediately and seek medical treatment in time.
Nature:
-Appearance: colorless liquid
-Solubility: Soluble in organic solvents such as ethanol and dimethyl benzene
-Melting point: About -90 ° C
-Boiling point: About 240 ° C
Use:
3-(1,5-diethenyl-3-{[ethenyl (dimethyll) silyl]oxy}-1,1,5, phenyl) propyl 2-methylprop-2-enoate is widely used in the surface modification and coatings industries, including:
-As an additive for inks and coatings, it can improve its adhesion and water resistance
-Used to treat cellulose-based materials to improve their wettability and water resistance
-As a crosslinking agent for adhesives to improve bonding strength and durability
-In the rubber industry, it can be used to improve the bonding performance of rubber and metal or other materials
-Used to prepare polymer materials, such as polyamide, epoxy resin, etc.
Method:
The preparation method of 3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5, phenyl) propyl 2-methylprop-2-enoate is complicated, generally synthesized by chemical reaction.
Safety Information:
- 3-(1,5-diethenyl-3-{[ethenyl(dimethyl)silyl]oxy}-1,1,5,) propyl 2-methylprop-2-enoate does not have a corrosive effect on most materials at room temperature.
-During use or storage, care should be taken to avoid contact with strong oxidants and strong acids to prevent the production of hazardous substances or the release of harmful gases.
-Use with appropriate protective gloves, goggles and protective clothing. In case of careless contact, rinse with plenty of water immediately and seek medical treatment in time.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 3-METHACRYLOXYPROPYLTRIS(VINYLDIMETHYLSILOXY)SILANE Visit Supplier Webpage Request for quotation
CAS: 17096-10-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 17096-10-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 3-METHACRYLOXYPROPYLTRIS(VINYLDIMETHYLSILOXY)SILANE Visit Supplier Webpage Request for quotation
CAS: 17096-10-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 17096-10-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
3-(3-((Dimethyl(vinyl)silyl)oxy)-1,1,5,5-tetramethyl-1,5-divinyltrisiloxan-3-yl)propyl methacrylate
5-Methyl-4-phenyl-N-phenethyl-4,5-dihydro-3H-pyrrol-2-amine
1-溴-2,6-二氯苯
5,10-dimethyl-5,10-dihydrophenazine
Gadobutrol Impurity 104
甲基 3,4-二羟基-5-甲氧基苯酸盐
1,3-二氯四甲基二硅烷
石油酸亚钴
5-Methyl-4-phenyl-N-phenethyl-4,5-dihydro-3H-pyrrol-2-amine
1-溴-2,6-二氯苯
5,10-dimethyl-5,10-dihydrophenazine
Gadobutrol Impurity 104
甲基 3,4-二羟基-5-甲氧基苯酸盐
1,3-二氯四甲基二硅烷
石油酸亚钴